Iris duct dampers

15 October, 2005

Available in sizes from 100 800 mm from CCL Veloduct is the ABB range of iris duct dampers.

A range of iris duct dampers from CCL Veloduct provide effective control of airflow in either direction. The use of an iris damper reduces the overall dimensions of these dampers. Since they can be fully opened, no access is required for cleaning. Iris dampers can be used close to elbows and T pieces without causing turbulence in the air stream. They are made by ABB in Finland. All units incorporate combined measurement and regulation ports, which can be used when commissioning systems. They also have a built-in scale which gives easy reference to the variation in air volume at different settings. Iris dampers can be adjusted to any position between fully open and minimum setting and will remain in that position until the system is reset. All sizes from 100 to 800 mm have a rotary adjustment knob that is designed to prevent unauthorised adjustment.

Related links:

Government must do more to tackle heat pump and electric vehicle barriers, Which? says

Which? is calling on the government to provide more support for greener home heating and cars, as new research shows cost and other barriers are putting people off making the switch.

New study reveals job stress affects 70% of construction workers

A groundbreaking study conducted by researchers from the University of Cambridge has revealed that at least 70% of people in the construction industry report feeling stressed at work, and this not only has a negative impact on job performance but also personal life. The findings highlight the urgent need for effective strategies to combat workplace stress.

Calendar

Submit event

Tweets by MBS_magazine