Configuring motor drives — without powering them up

12 April, 2006

ABB’s FlashDrop enables drive parameters to be written to a motor drive or downloaded in just a couple of seconds, without even starting the drive.

Drive parameters from ABB motor drives can be copied and set in just a couple of seconds using the new FlashDrop technology — without even powering up the drive. A hand-held device comprises a control-panel base unit and programming tip. It can be used to choose and edit parameters and store several sets of parameters. No specialised knowledge is required to use FlashDrop. To transfer parameters between the FlashDrop unit and a drive, the programming tip is plugged into a socket on the drive’s front panel. Since the drive does not have to be connected to a power source, the process can be carried out without even removing the drive from its packaging. Wholesalers could thus configure drives before delivery or high-volume OEMs can speed up the setting of parameters. FlashDrop can also be used with a PC to take advantage of its larger storage capacity. ABB’s DrivePM software is installed on the PC and communication is via the serial port.

Related links:

Nuaire celebrates long service and a people-first culture built over decades

Nuaire has celebrated the exceptional loyalty and dedication of its employees at a long service awards event – a powerful reflection of a workplace culture that has been built and sustained over generations.

New advanced training facility opens to upskill HVAC industry

A new education facility has opened its doors and is set to advance skills and knowledge across the UK’s HVAC industry.

Calendar

Submit event

Tweets by MBS_magazine