Finder extends PIR options

05 May, 2011

Additions to Finder’s 18 Series of PIR motion detectors can meet the needs of applications with higher ceilings, higher loads and those requiring direct interface to a PLC or BMS. There are two versions, one for flush fitting and the other for surface mounting.

These detectors will switch loads at any voltage and are not restricted to 230 V AC. The normally open volt-free contacts are rated at 10 A. 24 V AC/DC versions are available for applications without a mains supply or where low-voltage operation is required.

They have a sensing angel of 110° and a reach of 2.8 m. There is a high-bay variant with a sensing range of up to 8 m.

Features include adjustable setting for light threshold and a light-on time adjustment of up to 35 minutes, making them suitable for use with HID lamps.

For more information on this story, click here: May 2011, 174

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

&#65279;Finder extends PIR options

Related links:

Related articles:

Finder extends PIR options