Finder extends PIR options

Finder, PIR, lighting control
Designed for longer range and higher loads — PIR sensors from Finder.

Additions to Finder’s 18 Series of PIR motion detectors can meet the needs of applications with higher ceilings, higher loads and those requiring direct interface to a PLC or BMS. There are two versions, one for flush fitting and the other for surface mounting.

These detectors will switch loads at any voltage and are not restricted to 230 V AC. The normally open volt-free contacts are rated at 10 A. 24 V AC/DC versions are available for applications without a mains supply or where low-voltage operation is required.

They have a sensing angle of 110° and a reach of 2.8 m. There is a high-bay variant with a sensing range of up to 8 m.

Features include adjustable setting for light threshold and a light-on time adjustment of up to 35 minutes, making them suitable for use with HID lamps.

For more information on this story, click here: April 2011, 105
Related links:
Related articles:



modbs tv logo

Built environment professionals remain positive on future of Net Zero

A recent survey by global climate tech firm IES has revealed that nearly three-quarters of UK built environment professionals believe achieving a Net Zero built environment by 2050 is within reach.

BESA research suggests clients are yet to engage with new building safety regime

Construction clients are failing to engage with the new building safety regime, according to research carried out by the Building Engineering Services Association (BESA).