Heat pump energy storage system

06 July, 2011

Phase Change Materials, PCM Products, thermal storage, phase change

Phase Change Materials (PCM) store and release thermal energy during the process of melting & freezing and the latest range of PCM solutions between -100°C and +885°C offer new application opportunities.

For example, using +8°C and +46°C PCM materials on both cold and hot side of the heat pump would spread the loads over 24 hours and reduce the machine size as much as by 50%. By also storing both hot and cold sides the overall COP nearly doubles not only reducing the running cost but also offers reliable and stand-by capacity system.

For more information on this story, click here: July 2011, 208

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

Heat pump energy storage system

Related links:

Related articles: